TM 1-1520-238-23
9-272
9.75.
MULTICHANNEL DIMMING CONTROLLER MODULE REMOVAL/INSTALLATION
(AVIM) – continued
c. Install module 3,3A (22) in chassis (2). Torque
screws (23) to 6.5 INCH-POUNDS.
(1) Position module (22) in chassis (2).
(2) Install two screws (23) and washers (24)
through both sides of chassis (2) and in mod-
ule (22).
(3) Torque two screws (23) to 6.5 INCH-
POUNDS. Use torque wrench, screwdriver bit
holder, and screwdriver bit.
d. Install module 2,2A (19) in chassis (2). Torque
screws (20) to 6.5 INCH-POUNDS.
(1) Position module (19) in chassis (2).
(2) Install two screws (20) and washers (21)
through both sides of chassis (2) and in mod-
ule (19).
(3) Torque two screws (20) to 6.5 INCH-
POUNDS. Use torque wrench, screwdriver bit
holder, and screwdriver bit.
e. Install module 1,1A (16) in chassis (2). Torque
screws (17) to 6.5 INCH-POUNDS.
(1) Position module (16) in chassis (2).
(2) Install two screws (17) and washers (18)
through both sides of chassis (2) and in mod-
ule (16).
(3) Torque two screws (17) to 6.5 INCH-
POUNDS. Use torque wrench, screwdriver bit
holder, and screwdriver bit.
GO TO NEXT PAGE
M04-3068-12
2
22
24
23
M04-3068-13
2
19
20
21
M04-3068-14
2
16
18
17
