TM 1-1520-238-23
9-273
9.75.
MULTICHANNEL DIMMING CONTROLLER MODULE REMOVAL/INSTALLATION
(AVIM) – continued
f. Install right heat sink cover (11) on chassis
(2). Torque screws (12) and (13) to 6.5 INCH-
POUNDS.
(1) Position cover (11) on chassis (2). Aline
screw holes and hold.
(2) Install two screws (13) and spacers (14) and
(15) through cover (11) and in chassis (2).
(3) Install seven screws (12) through cover (11) and
in chassis (2).
(4) Torque seven screws (12) and two screws
(13) to 6.5 INCH-POUNDS. Use torque
wrench, screwdriver bit holder, and screwdriver
bit.
g. Install left heat sink cover (6) on chassis (2).
Torque screws (7) and (8) to 6.5 INCH-POUNDS.
(1) Position cover (6) on chassis (2). Aline screw
holes and hold.
(2) Install two screws (8) and spacers (9) and
(10) through cover (6) and in chassis (2).
(3) Install seven screws (7) through cover (6) and in
chassis (2).
(4) Torque seven screws (7) and two screws (8)
to 6.5 INCH-POUNDS. Use torque wrench,
screwdriver bit holder, and screwdriver bit.
GO TO NEXT PAGE
M04-3068-15
11
2
12
13
15
13
14
2
6
7
8
10
8
9
M04-3068-16
