TM 1-1520-238-23
Change 2 9-344.1/(9-344.2 blank)
9.94.
TAIL OR WING NAVIGATION LIGHT INSTALLATION – continued
n. Install clamp (25) on wire (13).
(1) Install clamp (25) on wire (13).
(2) Install screw (26) through washer (27), clamp
(25), spacer (28), clamp (29), and clamp (30).
o. Inspect (QA).
p. Install access panel R578 (para 2.2).
CAUTION
Grommet must be installed around the
light bulb socket between socket and
housing. Ensure half of grommet is under
the edge of the housing. Improperly
installed grommet may result in broken
blubs.
q. Attach two identified lugs (34) on wire (13) to
navigation light adapter (31).
(1) Ensure grommet (31.1) is properly installed in
adapter (31).
(2) Install two screws (32), lockwashers (33), and
lugs (34).
r. Install adapter (31) in mount (35).
(1) Install three screws (36).
s. Perform
electrical
bond
check
(TM 55-1500-323-24).
(1) Bond shall be 0.1 OHM or less. Use
ohmmeter.
t. Perform navigation light maintenance opera-
tional check (TM 1-1520-238-T).
END OF TASK
2627
13
M04-1246-10
30
29
28
25
36
35
13
33
34
31
32
M04-1246-8A
31.1
