TM 1-1520-238-23
9-363
9.100.
ANTI-COLLISION LIGHT POWER SUPPLY REMOVAL/INSTALLATION continued
9.100.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.100.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.61).
c. Check connector for bent pins or damaged
threads (para 9.61).
d. Check removed and attaching parts for corro-
sion (para 1.49).
9.100.6. Installation
a. Install power supply (4) on mounting bracket
(19).
(1) Position power supply (4) on bracket (19).
(2) Install four screws (17) and washers (18).
b. Perform electrical bond check on power sup-
ply (4) (TM 55-1500-323-24).
(1) Bond shall be 0.0025 OHM or less. Use
ohmmeter.
c. Attach three connectors P102 (1), P103 (2),
and P104 (3) to power supply (4).
(1) Attach connector P102 (1) to receptacle
(PS5)J1 (5).
(2) Attach connector P103 (2) to receptacle
(PS5)J2 (6).
(3) Attach connector P104 (3) to receptacle
(PS5)J3 (7).
GO TO NEXT PAGE
4
1
M04-1243-3
18
17
5
19
6
2
3
7
