TM 1-1520-238-23
9-359
9.99.
ANTI-COLLISION LIGHT SUBASSEMBLY REPLACEMENT – continued
b. Detach two wires (6) and (7) from splices (8)
and (9) on frame (2).
(1) Remove insulating sleeving (item 98, App F)
from wires (6) and (7).
(2) Identify and detach two wires (6) from quick
disconnect terminals (8).
(3) Identify and detach two wires (7) from end
caps (9).
(4) Remove light (1).
9.99.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.99.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wiring for cracked, broken, or burned
insulation (para 9.61).
c. Check wire terminals for deformation and
loose attachment (para 9.61).
d. Check removed and attaching parts for corro-
sion (para 1.47).
9.99.6. Installation
a. Attach two wires (7) and (6) to splices (9) and
(8) on frame (2).
(1) Position light (1) on plate (2).
(2) Attach two identified wires (7) to end caps (9).
Use insulating sleeving (item 98, App F).
(3) Attach two identified wires (6) to terminals
(8). Use insulating sleeving (item 98, App F).
GO TO NEXT PAGE
M04-4213-3
2
1
7
6
8
9
M04-4213-2
2
1
7
9
6
8
