TM 1-1520-238-23
9-568
9.149.
SQUAT SWITCH TARGET PLATE ADJUSTMENT – continued
c. Remove target bracket (3) from main landing
gear (4).
(1) Remove two nuts (5) and washers (6).
(2) Remove two bolts (7) and washers (6).
9.149.4. Adjustment
a. Adjust target plate (1).
(1) Remove lockwire from top nut (8) and bottom
nut (9).
(2) Loosen bottom nut (9).
(3) Adjust target plate height B to achieve correct
clearance A. Use thickness gage.
Example:
Clearance A (from step a).
0.200 INCH
Required clearance.
0.170 INCH
Height B adjustment.
0.030 INCH
Adjustment. Increase height B 0.030 INCH.
(4) Tighten bottom nut (9).
(5) Lockwire top nut (8) to bottom nut (9). Use
wire (item 226, App F).
GO TO NEXT PAGE
6
7
3
5
6
4
M04-3010-3
9
M04-3010-4
B
8
1
9
8
M04-3010-7
