TM 1-1520-238-23
9-566
9.148.
STABILATOR AIRSPEED TRANSDUCER REMOVAL/INSTALLATION – continued
9.148.6. Installation
a. Install transducer (2) on airframe (10).
(1) Position transducer (2) on airframe (10).
(2) Install four screws (11) and washers (12)
through transducer (2) into airframe (10).
(3) Apply a bead of sealing compound to air-
speed transducer cover (13), union (6), union
(3), two brackets (14), connector (9), and all
screws (15). Use sealing compound
(item 177, App F) and brush (item 34,
App F).
b. Attach connector P983 or P984 (8) to recep-
tacle (MT17)J1 or (MT18)J1 (9).
c. Install pressure line (5) to transducer (2).
(1) Hold union (6). Install nut (7).
d. Install static line (1) to transducer (2).
(1) Hold union (3). Install nut (4).
e. Perform
electrical
bond
check
(TM 55-1500-323-24).
(1) Bond shall be 0.0025 OHM or less. Use
ohmmeter.
f. Leak test pitot static tube (TM 1-1500-204-23).
g. Inspect (QA).
h. Perform stabilator maintenance operational
check (TM 1-1520-238-T).
i. Secure access doors T250L, T250R, T290L,
T290R, and L325 (para 2.2).
END OF TASK
M04-2228-4
10
2
13
9
6
3
15
14
11
12
M04-2228-5
10
75
6
3
2
1
4
8
9
