TM 1-1520-238-23
9-596
Change 3
9.158.
SQUAT SWITCH REPLACEMENT – continued
9.158.6. Installation
CAUTION
Use care during installation as wire har-
ness can be damaged by chafing on bulk-
head.
a. Install switch (5) on bracket (6).
(1) Guide wires (1) and (3) through bulkhead
(10).
(2) Position switch (5) on bracket (6).
(3) Install two bolts (8) through washers (9),
bracket (6), and switch (5).
(4) Hold bolts (8). Install two nuts (7).
b. Pin identified wire (3) in ground stud (GS580)
(4) (TM 55-1500-323-24).
c. Pin two identified wires (1) in soft splices (2)
(TM 55-1500-323-24).
d. Check squat switch target plate adjustment
(para 9.149).
e. Inspect (QA).
f. Install rounds counter mounting bracket and
rounds counter (TM 9-1090-208-23-1).
g. Install radar jammer receiver/transmitter
(TM 11-1520-238-23-1).
h. Install radar jammer blower assembly
(TM 11-1520-238-23-1).
i. Perform squat switch system maintenance
operational check (TM 1-1520-238-T).
END OF TASK
M04-5166-4
5
6
8
9
7
1
3
10
M04-5166-5
1
3
4
2
