TM 1-1520-238-23
Change 3 9-591
9.156.
KYK INTERFACE CONNECTOR ADAPTER REPLACEMENT – continued
b. Remove adapter (2) from bracket (4).
(1) Remove dust cap (5) and nut (6) from adapter
(2).
(2) Remove adapter (2).
9.156.4. Cleaning
a. Wipe removed and attaching parts with clean
rag.
9.156.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.126).
b. Check wires and terminals for wear, cracks,
and cuts (para 9.126).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.156.6. Installation
a. Install adapter (2) on bracket (4).
(1) Position adapter (2) on bracket (4).
(2) Install nut (6) and dust cap (5) on adapter (2).
b. Attach wire harness (1) to adapter (2).
(1) Attach J894 (3) to adapter (2).
c. Inspect (QA).
d. Secure access panel R194 (para 2.2).
e. Perform embedded GPS – inertial mainte-
nance
operational
check
(TM 11-1520-238-23-2).
END OF TASK
M04-5142-3
6
2
5
4
M04-5142-4
6
2
4
5
M04-5142-5
2
3
4
1
