TM 1-1520-238-23
10-29
10.6.
FORWARD FUEL CELL AFT FUEL QUANTITY TRANSMITTER
REMOVAL/INSTALLATION – continued
a. Install transmitter (3) on fuel cell flange (37).
(1) Place transmitter (3) in fuel cell with electrical
connectors facing left side of helicopter.
(2) Aline transmitter (3) with flange (29).
(3) Install two washers (28) and bolts (27).
b. Install two bolts (31) on bracket (35).
(1) Install two bolts (31) through washers (34)
and bracket (35).
(2) Install two washers (33) and nuts (32).
c. Position leads (16) and (15) in clamp (22).
d. Install clamp (22) on transmitter (3).
(1) Install screw (25) through clamps (22) and
(26).
(2) Install washer (24) and nut (23).
e. Attach lead (15) and ground lead (16) to sen-
sor (17).
(1) Install screw (19) through yellow lead (16) on
terminal (38).
(2) Install screw (18) through orange lead (15) on
terminal (39).
(3) Position leads (15) and (16) in retainer (21).
(4) Tighten screw (20).
GO TO NEXT PAGE
M04-326-8
3
29
28
27
33
31
MO4-326-10
34
32
35
M04-326-11
3
21
19
39
20
15
16
18
38
17
22
25
26
24
23
