TM 1-1520-238-23
10-309
10.66.
CPG FUEL PANEL TANK SELECT SWITCH REPLACEMENT (AVIM) – continued
10.66.3. Removal
a. Detach connector (1).
(1) Remove two screws (2), nuts (3), and wash-
ers (4) attaching connector (1) to mounting
bracket (5).
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
b. Desolder seven wires (6) from CPG tank se-
lect switch (7).
(1) Identify seven wires (6).
(2) Desolder seven wires (6). Use soldering iron
(TM 55-1500-323-24).
c. Remove switch (7) from support panel (8).
(1) Remove nut (9).
(2) Remove switch (7), lockwasher (10), and key
washer (11) from back of panel (8).
10.66.4. Cleaning
a. Clean removed and attaching parts and sur-
faces (para 1.47).
GO TO NEXT PAGE
M04-2016-2
1
2
5
4
3
7
6
M04-2016-3
7
10
11
9
8
