TM 1-1520-238-23
10-399
10.94.
PRESSURE FUEL MANIFOLD REMOVAL/INSTALLATION – continued
c. Remove refuel line fitting connector (1).
(1) Turn connector nut (2) until it clears connec-
tor body (3).
(2) Pull body (3) back.
(3) Remove retainer halves (4).
(4) Remove and discard two packings (5).
d. Remove pressure refueling hose connector
(6).
(1) Turn connector nut (7) until it clears connec-
tor body (8).
(2) Pull body (8) back.
(3) Remove retainer halves (9).
(4) Remove and discard two packings (10).
e. Remove refuel line fitting (11).
(1) Remove sealant from four bolts (12).
(2) Hold four bolts (12). Remove four nuts (13)
and washers (14).
(3) Remove fitting (11) from mounting flange
(15).
(4) Remove and discard gasket (16).
GO TO NEXT PAGE
3
1
2
5
4
4
M04-352-2
6
7
8
10
9
10
M04-352-3
9
12
11
15
14 13
16
M04-352-4
