TM 1-1520-238-23
11-23
11.3.
FLIGHT CONTROL SYSTEM PUSH-PULL ROD NON-ADJUSTABLE ROD END BEARING
REPLACEMENT – continued
b. Install clevis bolt (5), washer (4), and nut (3).
(1) Hold fixed nut (6).
(2) Tighten nut (7) against keywasher (8).
(3) Lockwire clevis bolt (5) to keywasher (8) and
nut (3). Use wire (item 224, App F).
c. Inspect (QA).
d. Perform rig check on collective, directional,
lateral, or longitudinal flight control system,
as required (para 11.280).
END OF TASK
M04-4259-5
6
5
4
3
8
7
