TM 1-1520-238-23
Change 2
11-73
11.10.
LATERAL BELLCRANK AND LATERAL LINKS REMOVAL – continued
WARNING
FLIGHT SAFETY PART
Heat treated condition of lateral bell-
crank and bolt is critical to their ser-
viceability. Any indication of heat
oxidizing (discoloration), where visu-
ally detectable, requires replacement
of the part. These parts must be pro-
tected from unscheduled heating and
external impact during inspection and
other handling procedures.
CAUTION
To prevent damage to bushings, press
retention device lock fully when removing
bolt.
f. Remove bellcrank (11) from collective bell-
crank (26).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (27).
(3) Raise bellcrank (19).
(4) Hold bolt (28). Use open end wrench.
(5) Remove nut (29), washer (30), and nylon
washer (31). Use hinged handle and
crowfoot.
(6) Remove bolt (28) and nylon washer (32) by
pressing button (33).
(7) Lower bellcrank (19) as far as it will go.
GO TO NEXT PAGE
26
11
26
27
11
32
28
19
M04-1715-6
30
29
31
33
