TM 1-1520-238-23
11-72
Change 4
11.10.
LATERAL BELLCRANK AND LATERAL LINKS REMOVAL – continued
WARNING
Support longitudinal bellcrank before
disconnecting servocylinder to pre-
vent longitudinal bellcrank movement
and possible injury. If injury occurs,
seek medical aid.
e. Remove longitudinal servocylinder (18) from
longitudinal bellcrank (19).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (20).
(3) Hold bolt (21). Remove nut (22). Use open
end wrench and socket.
NOTE
Do not remove nylon washer unless it is
loose or excessively worn.
(4) Support bellcrank (19).
(5) Remove bolt (21), washer(s) (23) (if re-
quired), nylon washer (24) (if necessary), and
bushing (25) (if required).
(6) Remove servocylinder (18).
GO TO NEXT PAGE
21
23
19
22
M04-1715-5A
18
25
20
24
