TM 1-1520-238-23
11-380
11.86.
CPG CYCLIC LATERAL PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION
11.86.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.86.2. Initial Setup
Tools:
Aircraft mechanics tool kit (item 376, App H)
10 - 50 inch-pound 1/4-inch drive click type torque
wrench (item 434, App H)
Materials/Parts:
Cotter pin (2)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-238-T
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access doors B60 and B65L removed; fair-
ing L60 removed
WARNING
To prevent injury, maintenance per-
sonnel shall be warned before moving
controls. If injury occurs, seek medi-
cal aid.
11.86.3. Removal
a. Remove push-pull rod assembly (1) from bell-
crank (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5), washer (6), and bushing (7).
GO TO NEXT PAGE
M04-4303-1
4
M04-4303-2
1
7
6
5
2
3