TM 1-1520-238-23
11-422
11.96.
LATERAL F.S. 118.50 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
b. Remove lateral push-pull rod (5) from bell-
crank (6).
(1) Remove and discard cotter pin (7).
(2) Remove nut (8).
(3) Remove bolt (9), washer (10), and bushing
(11).
(4) Remove rod (5) from bellcrank (6).
c. Remove lateral push-pull rod (5) from bell-
crank (12).
(1) Remove and discard cotter pin (13).
(2) Remove nut (14).
(3) Remove bolt (15), washer (16), and bushing
(17) from bellcrank (12) and rod (5).
(4) Remove rod (5) from bellcrank (12).
(5) Remove rod (5).
11.96.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.96.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
5
M04-5087-3
11
9
10
8
7
6
M04-5087-4
15
1617
13
12
14
5
