TM 1-1520-238-23
11-427
11.97.
CPG TO PILOT LATERAL F.S. 118.50 CONTROL BRACKET ASSEMBLY
REMOVAL/INSTALLATION – continued
11.97.6. Installation
NOTE
Install the laminated spacer between the
bracket and the airframe. Adjust thick-
ness of the laminated spacer to obtain
minimum 0.010 INCH clearance from any
structure.
a. Install bracket (8) on airframe (14).
(1) Aline bracket (8) with airframe (14).
(2) Install two bolts (18) through bracket (8),
spacer (19), and airframe (14).
(3) Install two bolts (17) through airframe (14)
and bracket (8).
(4) Install four washers (16) and nuts (15).
(5) Verify minimum clearance of 0.010 INCH is
maintained between bracket (8) and any
structure.
GO TO NEXT PAGE
M04-4330-6
18
15
16
17
8
19
14
16
15
