TM 1-1520-238-23
11-489
11.111.
PILOT CYCLIC LONGITUDINAL PUSH–PULL ROD ASSEMBLY
REMOVAL/INSTALLATION – continued
11.111.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
b. Remove access cover (1) from pilot floor (2).
(1) Remove 28 screws (3) and washers (4).
(2) Remove cover (1).
c. Remove push-pull rod (5) from SPAD (6).
(1) Remove and discard cotter pin (7).
(2) Remove nut (8).
(3) Remove bolt (9), washer (10), and bushing
(11).
(4) Remove rod (5).
GO TO NEXT PAGE
M04-4381-2
1
2
3
4
8
10
M04-4381-3
11
9
7
5
6
