TM 1-1520-238-23
11-490
11.111.
PILOT CYCLIC LONGITUDINAL PUSH–PULL ROD ASSEMBLY
REMOVAL/INSTALLATION – continued
d. Remove rod (5) from cyclic stick arm (12).
(1) Remove and discard cotter pin (13).
(2) Remove nut (14).
(3) Remove bolt (15), washer (16), and bushing
(17).
(4) Remove rod (5).
11.111.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.111.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
13
14
17
16
15
M04-4381-4
5
12
