TM 1-1520-238-23
11-547
11.125. LONGITUDINAL F.S. 159.62 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
11.125.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
b. Remove access cover (1) from pilot cockpit
bulkhead (2).
(1) Move thermal insulation (3) away from bulk-
head (2) to expose cover (1).
(2) Remove 17 screws (4) and washers (5).
(3) Remove cover (1).
c. Remove push-pull rod assembly (6) from bell-
crank (7).
(1) Remove and discard cotter pin (8).
(2) Remove nut (9).
(3) Remove bolt (10), washer (11), and bushing
(12).
(4) Remove rod (6).
GO TO NEXT PAGE
4
1
5
2
3
M04-4384-2
M04-4384-3
10
11
12
6
7
9
8
M04-4384-4
