TM 1-1520-238-23
11-549
11.125. LONGITUDINAL F.S. 159.62 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION continued
11.125.6. Installation
CAUTION
To prevent damage to flight control sys-
tem components, do not use force to
aline bellcrank with bracket or to aline
pushpull rod with bellcrank.
a. Install adjustable end of rod (6) on bellcrank
(13). Torque nut (15) 30 to 40 INCH-POUNDS.
(1) Aline rod (6) with bellcrank (13).
(2) Install bolt (16) through washer (17), bushing
(18), bellcrank (13), and rod (6).
(3) Check fit of self-retaining bolt (16) (para
11.1).
(4) Install nut (15). Torque nut (15) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (14).
GO TO NEXT PAGE
M04-4384-7
6
13
1415
18
17
16