TM 1-1520-238-23
11-585
11.132. CPG TO PILOT CONTROL COLLECTIVE F.S. 118.50 SUPPORT BRACKET
REMOVAL/INSTALLATION – continued
11.132.6. Installation
NOTE
Install the laminated spacer between the
bracket and the airframe. Adjust thick-
ness of the laminated spacer as required
to allow for 0.008 INCH clearance.
a. Install bracket (8) on airframe (14).
(1) Aline three holes in bracket (8) with holes in
airframe (14).
(2) Install two bolts (18) through bracket (8),
spacer (19), and airframe (14).
(3) Install bolt (17) through bracket (8) and air-
frame (14).
(4) Install three washers (16) and nuts (15).
(5) Verify minimum clearance of 0.008 INCH is
maintained between bracket (8) and any
structure.
GO TO NEXT PAGE
M04-4334-6
19
18
17
16
15
8
15
16
14
