TM 1-1520-238-23
11-580
11.131. CPG COLLECTIVE F.S. 118.50 PUSH-PULL ROD ASSEMBLY
REMOVAL/INSTALLATION – continued
11.131.6. Installation
CAUTION
To prevent damage to flight control sys-
tem components, do not use force to
aline bellcrank with bracket or to aline
push-pull rod with bellcrank.
a. Install rod (1) on bellcrank (8). Torque nut (4) 30
to 40 INCH-POUNDS.
(1) Aline rod (1) with bellcrank (8).
(2) Install bolt (11) through washer (12), bushing
(13), bellcrank (8), and rod (1).
(3) Check fit of self-retaining bolt (11) (para 11.1).
(4) Install nut (10).
(5) Torque nut (10) to 30 INCH-POUNDS. Use
torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (9).
GO TO NEXT PAGE
1
8
11
13
9
12
M04-5089-4
10
