TM 1-1520-238-23
11-606
11.136.
COLLECTIVE F.S. 161.54 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
d. Install cover (20) on bulkhead (2).
(1) Aline holes in cover (20) with holes in bulk-
head (2).
(2) Install 18 screws (22) and washers (23).
(3) Secure insulation (10) on bulkhead (2) by fas-
tening pile tape (30) on hook tape (31).
e. Install cover (1) on bulkhead (2).
(1) Aline holes in cover (1) with holes in bulkhead
(2).
(2) Install 19 screws (11) and washers (12).
(3) Secure insulation (10) on bulkhead (2) by fas-
tening pile tape (30) on hook tape (31).
(4) Install two clamps (5) and (7) on wire har-
nesses (8) and (9).
(5) Install screw (3) through washer (4), clamp
(5), spacer (6), clamp (7), and bulkhead (2).
f. Install air duct No. 11 (para 13.27).
g. Perform collective flight control rigging main-
tenance operational check (TM 1-1520-238-T).
h. Install pilot seat (para 2.161).
END OF TASK
20
10
M04-5090-8
23
22
2
31
30
1
M04-5090-10
12
11
2
30
10
31
M04-5090-11
6
7
8
9
3
4
5
2
