TM 1-1520-238-23
11-700
11.159.
DIRECTIONAL F.S. 112.50 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION
11.159.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.159.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
10 - 50 inch-pound 1/4-inch drive click type torque
wrench (item 434, App H)
Materials/Parts:
Cotter pin (2)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-238-T
TM 9-1090-208-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
TM 9-1090-208-23
Area weapon, turret, and
flex chute removed
WARNING
To prevent injury, maintenance per-
sonnel shall be warned before moving
controls. If injury occurs, seek medi-
cal aid.
11.159.3. Removal
a. Remove push-pull rod assembly (1) from bell-
crank (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5), washer (6), and bushing (7).
(4) Remove rod (1).
GO TO NEXT PAGE
M04-4309-1
6
3
4
1
5
M04-4309-2
2
7
