TM 1-1520-238-23
11-705
11.160.
CPG TO PILOT DIRECTIONAL F.S. 112.50 CONTROL BRACKET
REMOVAL/INSTALLATION – continued
b. Remove bellcrank (2) from bracket (8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11), washer (12), and bushing
(13) from bracket (8) and bellcrank (2).
(4) Remove bellcrank (2).
c. Remove bracket (8) from airframe (14).
(1) Remove four nuts (15) and washers (16).
(2) Remove two bolts (17).
(3) Remove two bolts (18).
(4) Remove bracket (8).
11.160.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.160.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
8
9
12
13
M04-4328-3
11
2
10
15
17
18
16
8
M04-4328-4
16
14
