TM 1-1520-238-23
11-929
11.215.
PILOT LONGITUDINAL CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER
(LVDT) INSTALLATION – continued
e. Install LVDT (2) on bracket (14). Torque nut (15)
14 to 18 INCH-POUNDS.
(1) Aline LVDT (2) with bracket (14).
(2) Install bolt (16) through bracket (14) and rod
end (17) on LVDT (2).
(3) Check fit of self-retaining bolt (16) (para
11.1).
(4) Install nut (15). Torque nut (15) to 14 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
(6) Install new cotter pin (18).
f. Install pilot cyclic stick -9 rig pin (para 11.285).
g. Attach connector P232 (8) to receptacle J232
(19).
h. Install two clamps (20) on wire harness (9).
(1) Install two screws (21) through washers (22)
and clamps (20).
(2) Install two nuts (23).
GO TO NEXT PAGE
M04-1864-3
2
18
15
17
14
16
M04-1864-4
23
20
22
21
8
9
19
21
22
20
23
