DIRECTIONAL F.S. 199.25 PUSH-PULL ROD REMOVAL/INSTALLATION continued

DIRECTIONAL F.S. 199.25 PUSH-PULL ROD REMOVAL/INSTALLATION

DIRECTIONAL F.S. 199.25 PUSH-PULL ROD REMOVAL/INSTALLATION continued - TM-1-1520-238-23-7-2_224

TM-1-1520-238-23-7-2 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual
Page Navigation
196

TM 1-1520-238-23 11-1042 11.247. DIRECTIONAL F.S. 199.25 PUSH-PULL ROD REMOVAL/INSTALLATION – continued 11.247.3. Removal a. Remove directional control push-pull rod (1) from aft bellcrank (2). (1) Remove and discard cotter pin (3). (2) Remove self-locking nut (4). (3) Remove close tolerance bolt (5), washer (6), and sleeve bushing (7). b. Remove rod (1) from forward bellcrank (8). (1) Remove and discard cotter pin (9). (2) Remove self-locking nut (10). (3) Remove close tolerance bolt (11), washer (12), and sleeve bushing (13). (4) Remove rod (1). 11.247.4. Cleaning a. Wipe removed and attaching parts with a clean rag. 11.247.5. Inspection a. Check removed and attaching parts for dam- age (para 11.232). b. Check removed and attaching parts for corro- sion (para 1.49). c. Check all installed bushing(s) and/or bear- ing(s) for wear (para 11.232). d. Check all removed bushing(s) and/or bear- ing(s) for wear (para 11.4). GO TO NEXT PAGE M04-1796-2 1 7 6 5 3 4 2 9 M04-1796-3 1 12 11 13 8 10

Privacy Statement
Press Release
Contact