TM 1-1520-238-23
Change 4
11-1037
11.245.
DIRECTIONAL F.S. 199.25 BELLCRANK REMOVAL – continued
b. Remove aft push-pull rod (6) from bellcrank
(2).
(1) Remove and discard cotter pin (7).
(2) Remove self-locking nut (8).
(3) Remove close tolerance bolt (9), washer (10),
and sleeve bushing (11) from rod (6) and bell-
crank (2).
c. Remove bellcrank (2) from bracket (12).
(1) Remove and discard cotter pin (13).
(2) Remove self-locking nut (14).
(3) Remove close tolerance bolt (15), washer
(16) and sleeve bushing (17).
(4) Remove bellcrank (2).
d. Remove ball bearing (18) and sleeve spacer
(19) from bellcrank (2).
11.245.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.245.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
END OF TASK
7
8
2
M04-1786-3
6
10
11
9
M04-1786-4A
13
14
15
2
12
1617
M04-1786-5
2
19
18
