TM 1-1520-238-23
11-1049
11.249.
DIRECTIONAL F.S. 216.25 BELLCRANK REMOVAL – continued
b. Remove aft push-pull rod (8) from bellcrank
(2).
(1) Remove and discard cotter pin (9).
(2) Remove self-locking nut (10).
(3) Remove close tolerance bolt (11), washer
(12), and sleeve bushing (13).
c. Remove bellcrank (2) from bracket (14).
(1) Remove and discard cotter pin (15).
(2) Remove self-locking nut (16).
(3) Remove close tolerance bolt (17), sleeve
bushing (18), and internal spacer (19) and
bearing (20).
d. Remove counterbalance weight (21) from bell-
crank (2).
(1) Remove self-locking nut (22).
(2) Remove shear bolt (23), washer (24), sleeve
bushing (25), and weight (21).
11.249.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.249.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
END OF TASK
M04-1788-3
11
12
13
2
10
9
8
16
15
14
18
17
2
M04-1788-5
2019
M04-1788-6
21
23
25
24
22
2
