TM 1-1520-238-23
11-1052
11.250.
DIRECTIONAL F.S. 216.25 BELLCRANK INSTALLATION – continued
b. Install aft push-pull rod (9) on bellcrank (1).
Torque nut (10) 30 to 40 INCH-POUNDS.
(1) Position rod (9) in bellcrank (1).
(2) Install bushing (11) in bellcrank (1).
(3) Install bolt (12) through washer (13), bushing
(11), bellcrank (1), and rod (9).
(4) Check fit of self-retaining bolt (12) (para
11.1).
(5) Install nut (10). Torque nut (10) to 30 INCH-
POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (14).
c. Install forward push-pull rod (15) on bellcrank
(1). Torque nut (16) 30 to 40 INCH-POUNDS.
(1) Position rod (15) in bellcrank (1).
(2) Install bushing (17) in bellcrank (1).
(3) Install bolt (18) through washer (19), bushing
(17), bellcrank (1), and rod (15).
(4) Check fit of self-retaining bolt (18) (para
11.1).
(5) Install nut (16). Torque nut (16) to 30 INCH-
POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (20).
GO TO NEXT PAGE
M04-1789-5
12
13
11
1
10
14
9
18
19
17
15
1
16
20
M04-1789-6
