TM 1-1520-238-23
11-1094
Change 1
11.261. DIRECTIONAL SERVOCYLINDER SUPPORT AND SUPPORT BRACKET
REMOVAL/INSTALLATION – continued
11.261.3. Removal
a. Remove sealing compound from three nuts
(1) and bolts (2).
b. Remove directional servocylinder support (3)
from support bracket (4).
(1) Remove three nuts (1) and bushings (5).
(2) Remove three bolts (2) and washers (6).
c. Remove sealing compound from four nuts (7)
and faying surface of support (3).
d. Remove support (3) from tail rotor gearbox
(8).
(1) Remove four nuts (7) and washers (9).
(2) Remove support (3) from gearbox (8).
NOTE
If support bracket removal is not re-
quired, go to paragraph 11.261.4.
GO TO NEXT PAGE
M04-1778-1
1
5
4
2
3
M04-1778-3A
6
M04-1778-4A
3
9
7
8
