TM 1-1520-238-23
11-1142
11.270. DIRECTIONAL F.S. 534 BELLCRANK REMOVAL/INSTALLATION – continued
b. Install upper push-pull rod (8). Torque nut (6)
30 to 40 INCH-POUNDS.
(1) Aline rod (8) with bellcrank (5).
(2) Install bolt (7) through bellcrank (5) and rod
(8).
(3) Check fit of self-retaining bolt (7) (para 11.1).
(4) Install nut (6). Torque nut (6) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (9).
NOTE
Do not apply sealing compound to spheri-
cal bearing.
(7) Apply sealing compound to head of bolt (7)
and nut (6). Use sealing compound
(item 178, App F).
GO TO NEXT PAGE
M04-1774-6
9
6
8
5
7
