TM 1-1520-238-23
11-1213
11.285.
RIGGING LONGITUDINAL FLIGHT CONTROLS BETWEEN PILOT AND CPG CYCLIC
STICKS continued
m. Install F.S. 165 rod end (1) on input lever (2).
Torque nut (4) 30 to 40 INCH-POUNDS.
(1) Install bolt (5) through washer (6), input lever
(2), and rod end (1).
(2) Check fit of self-retaining bolt (5) (para 11.1).
(3) Install nut (4). Torque nut (4) to 30 INCH-
POUNDS. Use torque wrench.
(4) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(5) Install new cotter pin (3).
n. Inspect (QA).
o. Secure access cover B85R (para 2.2), if re-
moved.
p. Perform longitudinal (cyclic) flight control rig-
ging maintenance operational check
(TM 1-1520-238-T).
q. Install pilot cyclic stick cover (para 11.46).
r. Install CPG cyclic stick cover (para 11.65).
s. Install access panels L200 and R200 (para
2.2).
t. Install
gun
turret
assembly
(TM 9-1090-208-23).
END OF TASK
M04-3016-9
1
2
3
4
5
6