TM 1-1520-238-23
12-41
12.12.
CPG WINDSHIELD WIPER CONVERTER REPLACEMENT - continued
NOTE
To ensure proper installation of flex shaft,
coupling must be installed between flex
shaft and converter fitting.
b. Install flex shaft (8) on converter (1). Torque
nut (9) to 100 INCH-POUNDS.
(1) Remove protective cap (11) from nut (9).
(2) Install coupling (10) and nut (9) on converter
(1).
(3) Torque nut (9) to 100 INCH-POUNDS. Use
torque wrench.
(4) Lockwire nut (9) to converter (1). Use wire
(item 229, App F).
c. Install converter (1) on airframe (2).
(1) Position holes on adapter (12) with holes on
airframe (2) and cover (3).
(2) Install four screws (6) through washers (7),
cover (3), and airframe (2) into adapter (12).
d. Apply sealing compound around cover (3),
shaft (4), stud (5), and four screws (6). Use
sealing compound (item 175, App F) and brush
(item 34, App F).
GO TO NEXT PAGE
M04-962-8
2
1
7
3
10
8
9
11
6
12
M04-962-6
4
3
5
6
