TM 1-1520-238-23
12-46
12.14.
CPG WINDSHIELD WIPER MOTOR REPLACEMENT - continued
NOTE
The coupling can fall out when flex shaft
is removed.
c. Remove wiper flex shaft (1) from wiper motor
(2).
(1) Remove lockwire from motor (2) and nut (3).
(2) Remove nut (3) and coupling (4) from motor
(2).
(3) Install protective cap (5) on nut (3).
d. Remove motor (2) and mounting plate (6) from
bracket (7).
(1) Remove sealant from screw (8), washer (9),
and lead (10) (para 1.47).
(2) Remove screw (8), washer (9), and lead (10).
(3) Remove three screws (11) and washers (12).
(4) Remove motor (2) and plate (6).
e. Detach connector P290 (13) from receptacle
(B5)J1 (14).
f. Remove plate (6) from motor (2).
(1) Remove lockwire from four bolts (15).
(2) Remove four bolts (15) and washers (16)
from plate (6).
(3) Remove plate (6).
GO TO NEXT PAGE
M04-970-8
5
2
1
3
4
3
11
12
14
2
M04-970-9
13
7
6
10
9
8
VIEW
ROTATED
M04-970-5
6
15
16
2
