TM 1-1520-238-23
12-52
12.15.
CPG WINDSHIELD WIPER ALINEMENT - continued
12.15.6. Installation
NOTE
To ensure proper installation of wiper,
spacer must be installed between wiper
arm and converter. Spacer can fall out
when wiper arm is removed.
a. Install arm (1) on shaft (2).
(1) Install spacer (5) and arm (1) on shaft (2).
(2) Adjust arm (1) on shaft (2) until end of blade
(9) is 0.50 INCH from lower edge of canopy
frame (10).
(3) Install bolt (4) through arm (1) on shaft (2).
(4) Lockwire bolt (4) to arm (1). Use wire
(item 229, App F).
b. Install link (6) on stud (7).
(1) Position link (6) on stud (7).
(2) Install new cotter pin (8).
GO TO NEXT PAGE
M04-3510-9
1
2
5
1
M04-3510-4
9
0.50 IN
10
2
M04-3510-5
8
6
7
2
4
1
