TM 1-1520-238-T-7
11–166
11–23.
DASE– MAINTENANCE OPERATIONAL CHECK (cont)
11–23
If 28 VDC BUCS NO-GO appears on HOD, refer to
TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–66 and perform
troubleshooting.
If PILOT LONG 1 DCPLR NO-GO PLT
COMPARTMENT OR PILOT LONG 2 DCPLR
NO-GO PLT COMPARTMENT appears on HOD,
refer to TM 1-1520-238-T-3, DASE Multiplex Read
Codes, and perform troubleshooting. Then, if no fault
is found, go to paragraph 11–67 and perform
troubleshooting.
If PILOT LAT 1 DCPLR NO-GO PLT
COMPARTMENT OR PILOT LAT 2 DCPLR NO-GO
PLT COMPARTMENT appears on HOD, refer to
TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–68 and perform
troubleshooting.
If PILOT DIR 1 DCPLR NO-GO PLT
COMPARTMENT OR PILOT DIR 2 DCPLR NO-GO
PLT COMPARTMENT appears on HOD, refer to
TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–69 and perform
troubleshooting.
If PILOT COLL 1 DCPLR NO-GO PLT
COMPARTMENT OR PILOT COLL 2 DCPLR
NO-GO PLT COMPARTMENT appears on HOD,
refer to TM 1-1520-238-T-3, DASE Multiplex Read
Codes, and perform troubleshooting. Then, if no fault
is found, go to paragraph 11–70 and perform
troubleshooting.
If CPG LONG 1 DCPLR NO-GO CPG
COMPARTMENT OR CPG LONG 2 DCPLR NO-GO
CPG COMPARTMENT appears on HOD, refer to
TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–71 and perform
troubleshooting.
