TM 1-1520-238-T-7
11–168
11–23. DASE– MAINTENANCE OPERATIONAL CHECK (cont)
11–23
If LONG ACTUATOR NO-GO appears on HOD, refer
to TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–78 and perform
troubleshooting.
If LAT ACTUATOR NO-GO appears on HOD, refer to
TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–79 and perform
troubleshooting.
If DIR ACTUATOR NO-GO appears on HOD, refer to
TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–80 and perform
troubleshooting.
If COLL ACTUATOR NO-GO appears on HOD, refer
to TM 1-1520-238-T-3, DASE Multiplex Read Codes,
and perform troubleshooting. Then, if no fault is
found, go to paragraph 11–81 and perform
troubleshooting.
If PILOT LONG LVDT NO-GO PLT COMPARTMENT
appears on HOD, refer to TM 1-1520-238-T-3, DASE
Multiplex Read Codes, and perform troubleshooting.
Then, if no fault is found, go to paragraph 11–82 and
perform troubleshooting.
If PILOT LAT LVDT NO-GO PLT COMPARTMENT
appears on HOD, refer to TM 1-1520-238-T-3, DASE
Multiplex Read Codes, and perform troubleshooting.
Then, if no fault is found, go to paragraph 11–83 and
perform troubleshooting.
If PILOT DIR LVDT NO-GO PLT COMPARTMENT
appears on HOD, refer to TM 1-1520-238-T-3, DASE
Multiplex Read Codes, and perform troubleshooting.
Then, if no fault is found, go to paragraph 11–84 and
perform troubleshooting.
