TM 1-1520-238-10
Change 8
3-64.11
Table 3-22.4.
OFS UPDATE SUB–PAGE VARIABLE ACTION BUTTONS
Control/Display
Function
VABs 1, 2 & 3
Not Used.
VAB 4
Used to accept the offset update. Display returns to page previously displayed prior to
selecting the offset update function.
VABs 5, 6 & 7
Not Used.
VAB 8
Used to reject the offset update. Display returns to page previously displayed prior to
selecting the offset update function.
3.16.8 FDLS page. Depression of the FDLS FAB dis-
plays the FDLS page on the CDU. The display on the
CDU (Fig. 3-25.5) is intended to inform the operator that
FDLS prompts/displays will not be provided on the CDU.
All VABs are inactive on the FDLS page display. FDLS
prompts will be provided through the ORT and HMD. FD/
LS operations are conducted through the CDU keyboard
and entry of any FDLS Menu two digit code will initiate the
FDLS BIT.
M01-0331
FOR MENU/PROMPTS
FDLS OPS ACTIVE
USE ORT/HMD
Figure 3-25.5.
FDLS Page
3.16.9 FPLN CDU Displays. Depressing the FPLN FAB
displays the Waypoint List (WPT LIST) page.
a. Waypoint List (WPT LIST) Page.
NOTE
The Waypoint List and Target List are
separately, but identically, structured.
The following data applies to the opera-
tion of both. Where minor operating dif-
ferences occur, each is described sepa-
rately.
Waypoints are numbered 1 through 40;
Targets are numbered 41 through 80.
1. Each page provides access to a list of 40 Way-
points contained in the Waypoint List (Figures
3-25.6 and 3-25.7) or 40 targets contained in the
Target List. The WPT LIST and TGT LIST are
identically formatted except for the page title on
line 2 of the display and numbering. Waypoints
numbered 1–20 are displayed on the first page;
waypoints numbered 21–40 are displayed on
the second page. The first TGT LIST page will
list numbers 41–60; page 2 will list numbers
61–80. The second page of each list is ac-
cessed by depressing VAB 8 on page 1. De-
pressing VAB 8 on the second page will return
the display to the first page.
