TM 1-1520-238-10
Change 10
4-66.5/(4-66.6 blank)
12. For -5 5 enter modified correctors:
a. CDU – Select PGM.
b. CDU – Select AWS HARM.
c. Enter appropriate correction data (AZ or EL)
on CDU scratchpad.
d. Depress VAB 2 (AZ) or VAB 6 (EL), as ap-
propriate, to enter correction factors into
FCC.
e. The CDU screen will display harmonization
corrector Deltas and Totals in the following
format:
AWS HARMONIZATION
DELTAS –MR–
AZ=+00.0 EL=+00.0
TOTALS –MR–
AZ=+00.0 EL=+00.0
f. Repeat steps 1 through 10 and 12 while re-
ducing field of view as appropriate to DTV-
NFOV until center of impact is verified to be
within zoom FOV gates. When FOV gates
are achieved, proceed to step g.
g. Press PGM VAB to return to top level page.
4.33.3 Aerial Rocket Control System.
WARNING
To prevent inadvertent rocket firing, en-
sure ARCS panel inventory is complete
prior to placing the pilot’s or CPG’s ARM/
SAFE switch to the ARM position. At no
time during takeoff or landing will the pi-
lot’s or CPG’s ARM/SAFE switch be in
the ARM position.
NOTE
If one or more pylons have failed, rocket fir-
ing from the failed pylon is disabled without
inhibiting rocket firing from the remaining
pylons.
a. Cooperative Engagement Mode.
1. Pilot MASTER ARM/SAFE switch – SAFE.
2. CPG ARM/SAFE switch – SAFE.
3. RKT select switch – As desired.
4. ARCS inventory – Complete.
5. ROCKETS panel – Set QTY, PEN–M and ZONE
SEL.
6. Pilot MASTER ARM/SAFE switch – ARM.
7. CPG ARM/SAFE switch – ARM.
8. Desired target – Acquire and track with TADS.
9. Pilot WAS – RKT.
10. CPG ORT WAS – RKT.
11. Laser trigger - Press, establish range to target.
12. Pilot align rocket steering symbology.
13. Weapons trigger - Press until selected quantity
has been fired or target neutralized.
14. Pilot WAS - Deselect RKT.
15. CPG ORT WAS – Deselect RKT.
b.Pilot/CPG Independent Mode.
1. ARM/SAFE switches – SAFE.
2. RKT select switch – As desired.
3. ARCS inventory – Complete.
4. ROCKETS control panel – Set QTY, PEN–M
and ZONE SEL.
5. ARM/SAFE switches – ARM.
6. Crewmember desiring to fire – Track target with
HMD, maintain LOS reticle on target. Establish
range.
7. WAS – RKT.
8. Align rocket steering symbology.
9. Weapons trigger – Press until selected quantity
has been fired or target neutralized.
10. WAS – Deselect RKT.
