TM 1-1520-238-23
3-152
Change 4
3.44.
TAIL LANDING GEAR FORK ASSEMBLY DISASSEMBLY/ASSEMBLY
3.44.1. Description
This task covers:
Disassembly. Cleaning. Inspection. Repair. Assembly.
3.44.2. Initial Setup
Tools:
Aircraft maintenance tool kit (item 371, App H)
Light duty laboratory apron (item 27, App H)
0.300 - 24/0 - 24-inch inside/outside vernier caliper
(item 54, App H)
Aircraft maintenance fixture (item 134, App H)
Chemical protective gloves (item 154, App H)
Industrial goggles (item 156, App H)
14-quart utility pail (item 222, App H)
2-ton hydraulic hand operated arbor press (item 235,
App H)
Adjustable air filtering respirator (item 262, App H)
0 - 30 inch-pound 1/4-inch drive dial indicator torque
wrench (item 445, App H)
Materials/Parts:
Bushing
Brush (item 34, App F)
Carbon dioxide (item 40, App F)
Cloth (item 52, App F)
Corrosion resistant coating (item 64A, App F)
Dry cleaning solvent (item 74, App F)
Epoxy primer coating kit (item 76, App F)
Grease (item 87, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
3.43
Tail landing gear fork removed
WARNING
FLIGHT SAFETY PART
The tail landing gear and/or components of the tail landing gear are flight safety parts. Failure
to follow maintenance instructions may result in serious injury or death of crewmembers
and/or serious damage to the helicopter.
GO TO NEXT PAGE
