TM 1-1520-238-23
3-151
3.43.
TAIL LANDING GEAR FORK REMOVAL/INSTALLATION continued
g. Install cam housing (1) on arm and socket (2).
(1) Lubricate inside of cam housing (1). Use
grease (item 87, App F).
(2) Install cam housing (1) on arm and socket (2).
(3) Install two bolts (3).
(4) Hold bolts (3). Install two washers (5) and
nuts (4). Do not torque.
h. Adjust cam housing (1) to center lock actuator
lockpin in hole of fork.
(1) Hold two bolts (3). Torque two nuts (4) to 140
INCH-POUNDS.
i. Inspect (QA).
j. Install tail landing gear wheel and axle (para
3.46 or 3.49 and 3.47 or 3.50).
k. Remove tripod jack (para 1.69).
END OF TASK
M04-033-10
4
5
1
3
2