TM 1-1520-238-23
3-150
3.43.
TAIL LANDING GEAR FORK REMOVAL/INSTALLATION – continued
3.43.6. Installation
a. Install new seal (11) on arm and socket (2).
b. Install fork (9) on arm and socket (2).
c. Install bearing (10) and washer (8) on arm and
socket (2).
(1) Lubricate bearing (10) and washer (8). Use
grease (item 87, App F).
(2) Install bearing (10) and washer (8) on arm
and socket (2).
d. Inspect (QA).
NOTE
Support fork with hand while installing re-
taining ring.
e. Install retaining ring (7) on arm and socket (2).
Use retaining ring pliers.
(1) Lubricate retaining ring (7). Use grease
(item 87, App F).
(2) Install retaining ring (7) on arm and socket
(2).
f. Install new packing (6) on arm and socket (2).
(1) Lubricate new packing (6). Use grease
(item 87, App F).
(2) Install packing (6) on arm and socket (2).
GO TO NEXT PAGE
M04-033-8
11
2
9
2
6
7
8
10
M04-033-9
