TM 1-1520-238-23
3-148
3.43.
TAIL LANDING GEAR FORK REMOVAL/INSTALLATION – continued
3.43.3. Removal
a. Remove cam housing (1) from arm and socket
(2).
(1) Hold two bolts (3). Remove two nuts (4) and
washers (5).
(2) Remove two bolts (3).
(3) Remove housing (1) from arm and socket (2).
b. Remove and discard packing (6) from arm and
socket (2).
NOTE
While removing retaining ring, support
fork with hand.
c. Remove retaining ring (7) and washer (8) from
arm and socket (2). Use retaining ring pliers.
d. Lower fork (9) from arm and socket (2).
GO TO NEXT PAGE
M04-033-2
4
5
1
3
2
M04-033-3
9
2
8
7
6
