TM 1-1520-238-23
Change 4
3-181
3.49.
TAIL LANDING GEAR WHEEL (WITHOUT GREASE FITTING) AND AXLE
REMOVAL/INSTALLATION – continued
f. Install axle (14) through wheel (5). Ensure that
valve stem (21) is positioned on the opposite side
of the tail wheel spacer (15) and lock (16).
g. Install spacer (13) on axle (14).
h. Install cable (1) on bracket (2).
(1) Install nut (3) on cable (1).
(2) Install discharger (1) through bracket (2).
(3) Hold nut (3). Install nut (4).
i. Install wheel (5) on fork (6).
(1) Position wheel (5) on fork (6).
(2) Aline bolt holes in axle (14) with bolt holes in
fork (6).
(3) Install bolt (8) through washer (12), fork (6),
axle (14), and support (11) on right-hand side
of fork (6).
(4) Install bolt (8) through bracket (2), fork (6),
axle (14), and support (11) on left-hand side
of fork (6).
(5) Hold two bolts (8). Install washers (10) and
nuts (9).
(6) Install two new cotter pins (7).
GO TO NEXT PAGE
M04-3429-5B
13
14
16
5
VIEW
ROTATED
21
15
M04-3429-6A
14
2
8
4
3
1
6
11
7
109
11
109
7
12
8
5
