TM 1-1520-238-23
3-214
3.58.
PARKING BRAKE MASTER CYLINDER DISASSEMBLY/ASSEMBLY (AVIM) – continued
3.58.3. Disassembly
a. Remove rod end (1) with bearing (2) from mas-
ter cylinder assembly (3).
(1) Remove and discard lockwire from nut (4)
and key washer (5).
(2) Hold rod end (1). Loosen nut (4).
(3) Remove rod end (1).
(4) Remove washer (5) and nut (4) from cylinder
(3).
WARNING
Master cylinder is spring loaded. Re-
move cylinder brake cap with extreme
care. If cap is not restrained, serious
injury can result. If injury occurs, seek
medical aid.
b. Disassemble cylinder (3).
(1) Remove lockwire from four screws (6) and
cylinder brake cap assembly (7).
(2) Remove bleed screw (8) and cylinder brake
seal (9). Discard seal (9).
(3) Remove cap (7) and packing (10). Discard
packing (10).
(4) Remove four screws (6) from cylinder brake
cap (11).
(5) Remove cap (11) with packing (12) from cyl-
inder (3).
(6) Remove and discard packing (12).
GO TO NEXT PAGE
M04-2953-2
2
1
5
4
3
6
M04-2953-3
10
7
9
8
3
11
12
