TM 1-1520-238-23
3-212
Change 4
3.57.
CPG BRAKE MASTER CYLINDERS REMOVAL/INSTALLATION – continued
(3) Install rig pin (24) in spad (25). Use flight
control rigging kit.
NOTE
Ensure rig pin has a loose fit.
(4) Install rig pin (26) in pedal (2).
(5) Adjust rod end (19) by lengthening or short-
ening to install cylinder (1) to clevis (23) of
pedal (2).
(6) Hold rod end (19). Tighten nut (21).
(7) Lockwire nut (21) to key washer (27). Use
wire (item 224, App F).
NOTE
Install bolt with head facing inboard.
(8) Install bolt (4) through clevis (23) and rod end
(19).
(9) Hold bolt (4). Install nut (5).
(10) Install new cotter pin (3) in bolt (4).
(11) Remove rig pin (24) from spad (25).
(12) Remove rig pin (26) from pedal (2).
g. Inspect (QA).
h. Bleed brake system (para 1.45).
i. Set parking brakes (para 1.61).
j. Install
indirect
view
display
(IVD)
(TM 1-1270-476-20).
k. Secure access doors B41R and B60 (para 2.2).
l. Perform main landing gear maintenance op-
erational check (TM 1-1520-238-T).
END OF TASK
M04-131-12
25
24
M04-131-13
2
26
3
4
23
19
5
1
2
3
4
23
19
5
1
19
21
27
VIEW
ROTATED
VIEW
ROTATED
M04-131-9
