TM 1-1520-238-23
Change 4
3-211
3.57.
CPG BRAKE MASTER CYLINDERS REMOVAL/INSTALLATION – continued
c. Install cap (15) in lugs of mounting bracket
(22) so elbow (9) is facing inboard and for-
ward.
(1) Insert rod end (19) of cylinder (1) through
opening in CPG station floor.
(2) Position cap (15) between lugs of bracket
(22) with elbow (9) facing inboard and for-
ward.
NOTE
Install bolt with head facing inboard.
(3) Install bolt (11) through bracket (22), bushing
(14), and bearing of cap (15).
(4) Hold bolt (11). Install nut (13).
(5) Install new cotter pin (12) in bolt (13).
d. Install brake hose (8) on elbow (9).
(1) Hold elbow (9). Tighten nut (10).
(2) Hold elbow (9). Tighten nut (16).
(3) Lockwire nut (16) to screw (18) in cap (15).
Use wire (item 224, App F).
e. Enter CPG station (para 1.56). Observe all
safety precautions.
f. Install rod end (19) in clevis (23) of pedal (2).
(1) Position rod end (19) in clevis (23) of pedal
(2).
(2) Install bushing (6) (bushing (7) left pedal) in
clevis (23).
GO TO NEXT PAGE
M04-131-8
12
13
14
11
22
9
15
1
M04-131-10A
8
9
10
15
18
16
1
19
7
6
23
19
1
2
23
VIEW
ROTATED
VIEW
ROTATED
M04-131-11
